Welcome to CustomBox.co.nz A Division of Packaging Products Ltd

Custom Made Corrugated Boxes for any quantity, any size
Call free 0508 334 466

Box styles

Please note that all dimensions are internal dimensions

Regular Slotted Case (RSC)

This is the most popular style of case due to its versatility.
Easy to erect and can be closed by taping or gluing the top and bottom flaps (flaps butting).
Comes pre-glued on the side seam.
Cost effective solution

Min length: 75mm
Min width: 20mm
Min depth: 86mm
Maximum dimensions up to 1500mm but will vary depending on box configuration

Half Slotted Case (HSC)

Like an RSC except with no top flaps (open).
Easy to erect and can be closed by taping or gluing the bottom flaps.
Comes pre-glued on the side seam.
Often supplied with a lid and is ideal for products of variable height (lid becomes telescopic).
Suitable if the box is required to be opened regularly.

Min length: 75mm
Min width: 20mm
Min depth: 86mm
Maximum dimensions up to 1500mm but will vary depending on box configuration

Fully Overlapping Flap Regular Slotted Case (FOLF)

Like an RSC except with no top flaps (open).
Easy to erect and can be closed by taping or gluing the bottom flaps.
Comes pre-glued on the side seam.
Often supplied with a lid and is ideal for products of variable height (lid becomes telescopic).
Suitable if the box is required to be opened regularly.

Min length: 75mm
Min width: 20mm
Min depth: 86mm
Maximum dimensions up to 1500mm but will vary depending on box configuration

Box and Lid

A two-piece solution often used for low height products.
Lid height can be full depth or variable.
Both box and lid are supplied flat and can be erected by either taping, gluing or stapling the corners.
Also suitable style for boxes required to be opened regularly.
Two-piece style offers better stacking strength.

Min length: 155mm
Min width: 86mm
Min depth: 75mm
Maximum dimensions up to 1500mm but will vary depending on box configuration

5 Panel Folder (FPF)

A creased 5-panel folder that wraps around the product and is taped closed.
Ideal for packing large flat items or long narrow items.
Can have flaps on both ends or can be open on the ends (no flaps).
Available in two configurations:

  1. 5th panel overlaps 1st panel on the side;
  2. 1st and 5th panel butt in the middle.

Minimum length = 86mm
Minimum width = 75mm
Minimum depth option 1 = 75mm
Minimum depth option 2 = 20mm
Maximum dimensions will vary depending on box configuration

Close
Close